Skip to Content
Home > Patients & Visitors > Health Library > Bone Scan
A bone scan is a
test that can find damage to the bones, find
cancer that has spread to the bones, and watch problems such as infection and trauma to the bones. A bone scan can often
find a problem days to months earlier than a regular
During a bone scan, a
radioactive substance called a tracer is injected into a vein
in your arm. The tracer travels through your bloodstream and into your bones. Then a special camera takes pictures of
the tracer in your bones.
Areas that absorb little or no amount of tracer appear as dark or "cold"
spots. This could show a lack of blood supply to the bone or certain types of cancer.
Areas of fast bone growth or
repair absorb more tracer and show up as bright or "hot"
spots in the pictures. Hot spots may point to problems such as arthritis, a tumor, a fracture, or an infection.
bone scan is done to:
Before the bone scan, tell your doctor
You will be asked to drink extra fluids after the tracer is injected. You will empty your bladder right before the scan.
You probably will have to wait 1 to 3 hours after the tracer is
injected before your bone scan is done. So you may want to bring something to read or a project to pass the time. For some
types of bone scans, pictures are taken during the tracer injection,
right afterward, and then 3 to 5 hours after the injection.
You may be asked to sign a consent form
before the test. Talk to your doctor about any concerns you have regarding the
need for the test, its risks, how it will be done, or what the results will
mean. To help you understand the importance of this test, fill out the medical test information form(What is a PDF document?).
A bone scan is usually done by a
nuclear medicine technologist. The scan pictures are usually interpreted by a
nuclear medicine specialist.
need to remove any jewelry that might get in the way of the scan. You may need to
take off all or most of your clothes. You will be given a cloth or paper covering to use during the
Your arm will be cleaned where the
tracer will be injected. A small amount of the tracer
It takes about 2 to 5 hours for the tracer to
bind to your bone so that pictures can be taken with a special camera. During
this time, you may be asked to drink 4 to 6 glasses of water so your body can wash out the tracer that does not collect in your
bones. Just before the scan begins, you will probably be asked to empty your
bladder to prevent any radioactive urine from blocking the view of your pelvic
bones during the scan.
You will lie on a table, with a
large scanning camera above you. It may move slowly
above, below, and around your body, scanning for radiation released by the tracer and
producing pictures. The camera does not
produce any radiation.
You may be asked to move into different
positions. You need to
lie very still during each scan to avoid blurring the pictures.
bone scan takes about 1 hour.
You may feel nothing at all from the
needle when the tracer is injected, or you may feel a brief sting or
pinch. The bone scan is usually
painless. You may find it hard to remain still during the scan. Ask for a
pillow or blanket to make yourself as comfortable as possible before the scan
The test may be uncomfortable if you are having joint or
bone pain. Try to relax by breathing slowly and deeply.
Allergic reactions to the tracer are very rare. Your body will get rid of most of the tracer through your urine or stool within a day. Be
sure to flush the toilet right away and thoroughly wash your hands with soap and
water. The amount of radiation is so small that it is not a risk for people to
come in contact with you after the test.
You may have some
soreness or swelling where the needle went in. These symptoms can
usually be relieved by applying moist, warm compresses to your arm.
There is always a slight risk of damage to cells or tissue from being
exposed to any radiation, including the low level of radiation released by the tracer in this test.
The results of a bone scan are usually available
within 2 days.
The radioactive tracer is
evenly spread among the bones. No areas of too much or too little tracer
The tracer has accumulated in
certain areas of the bone, indicating one or more "hot" spots. Hot spots may be
caused by a fracture that is healing, bone cancer, a bone infection (osteomyelitis),
arthritis, or a disease of abnormal bone
metabolism (such as
Certain areas of the bone lack the presence of tracer, indicating one or more "cold" spots. Cold spots
may be caused by a certain type of cancer (such as
multiple myeloma) or lack of blood supply to the bone
Reasons you may not be able to have the test or why the results may not be helpful include:
Other Works Consulted
Fischbach FT, Dunning MB III, eds. (2009).
Manual of Laboratory and Diagnostic Tests, 8th ed.
Philadelphia: Lippincott Williams and Wilkins.
Pagana KD, Pagana TJ (2010). Mosby’s Manual of Diagnostic and Laboratory Tests, 4th ed. St. Louis: Mosby Elsevier.
October 1, 2012
Anne C. Poinier, MD - Internal Medicine & Myo Min Han, MD - Nuclear Medicine
How this information was developed to help you make better health decisions.
To learn more visit Healthwise.org
© 1995-2013 Healthwise, Incorporated. Healthwise, Healthwise for every health decision, and the Healthwise logo are trademarks of Healthwise, Incorporated.
Our interactive Decision Points guide you through making key health decisions by combining medical information with your personal information.
You'll find Decision Points to help you answer questions about:
Get started learning more about your health!
Our Interactive Tools can help you make smart decisions for a healthier life. You'll find personal calculators and tools for health and fitness, lifestyle checkups, and pregnancy.
Feeling under the weather?
Use our interactive symptom checker to evaluate your symptoms and determine appropriate action or treatment.
Send Us Your Feedback
North Kansas City Hospital.